Product Description

Sealed Flange/Flanged Deep Groove Ball Bearings F6000 F6001 F6002 F6003 F6004 F6005 Z ZZ RS 2RS F6000-2RS F6001-2RS F6002-2RS F6003-2RS F6004-2RS F6005-2RS

Bearing Specification

Bearing Designation		Dimension(mm)
-RS	-2RS	d	D	B	rs	D1	C1
-Z	-ZZ				min
F6000	F6000	10	26	8	0.3	28	2
F6001	F6001	12	28	8	0.3	30	2
F6002	F6002	15	32	9	0.3	34.25	2.25
F6003	F6003	17	35	10	0.3	37.5	2.5
F6004	F6004	20	42	12	0.6	45	3
F6005	F6005	25	47	12	0.6	50	3
F6006	F6006	30	55	13	1	58.25	3.25
F6007	F6007	35	62	14	1	65.5	3.5
F6008	F6008	40	68	15	1	71.75	3.75
F6009	F6009	45	75	16	1	79	4
F6571	F6571	50	80	16	1	84	4
F6200	F6200	10	30	9	0.6	32.25	2.25
F6201	F6201	12	32	10	0.6	34.5	2.5
F6202	F6202	15	35	11	0.6	37.75	2.75
F6203	F6203	17	40	12	0.6	43	3
F6204	F6204	20	47	14	1	50.5	3.5
F6205	F6205	25	52	15	1	55.75	3.75
F6206	F6206	30	62	16	1	66	4
F6207	F6207	35	72	17	1.1	76.25	4.25
F6208	F6208	40	80	18	1.1	84.5	4.5
F6209	F6209	45	85	19	1.1	89.75	4.75
F6210	F6210	50	90	20	1.1	95	5
F6300	F6300	10	35	11	0.6	37.75	2.75
F6301	F6301	12	37	12	1	40	3
F6302	F6302	15	42	13	1	45	3
F6303	F6303	17	47	14	1	50.5	3.5
F6304	F6304	20	52	15	1.1	55.75	3.75
F6305	F6305	25	62	17	1.1	66	4
F6306	F6306	30	72	19	1.1	76.5	4.5
F6307	F6307	35	80	21	1.5	85	5
F6308	F6308	40	90	23	1.5	95	5
F6309	F6309	45	100	25	1.5	105.5	5.5
F6310	F6310	50	110	27	2	115.5	5.5

Bearing Introduction

Main introduction to China Factory Good Price 6000/6200/6300 Series Deep Groove Ball Bearing

*Deep groove ball bearing is the most widely used bearing type and is particularly versatile. It has low friction and is optimized for low noise and low vibration which enables high rotational speeds. It accommodates radial and axial loads in both directions, are easy to mount, and requires less maintenance than other bearing types.

*Guomai Bearings catalogue lists a range of deep groove ball bearing series including 6000 series, 6000N series, 6000-ZN series, 6000-2ZN series, 6000Z series, 6000-2Z series, 6000-LS & 6000-RZ series, 6000-2LS&6000-2RZ series, F6000 series.

*Deep groove ball bearings could be used on auto and tractor gearbox, low power electric motor,home appliances,agricultural machinery, construction machinery,roller sports shoes,tools machinery and others.

Bearing Detailed Photos

Flanged/Flange Deep Groove Ball Bearing F6200-2RS Details Show

About ZheJiang CZPT Bearing

Factory Introduction

ZheJiang CZPT Bearing Co.,Ltd(hereinafter referred to as Guomai) was established in 1999, with more than 20 years of bearing research and manufacturing experience. The factory covers an area of 16000 m²,7000 m² of which is manufacturing area and the other is office and warehouse. Guomai has large stock for normally used bearing models and this enables us to deliver the bearing to customers within the shortest time. 

There are total 160 staffs, 6 automatic bearing assembly lines,116 CNC machines and 22 sets of precise inspection instruments. We not only have our own R&D team but also cooperate with ZheJiang University of Science and Technology, HangZhou Bearing Research Institute to develop new bearing designing and manufacturing technology.
In addition to conventional bearings, Guomai also provides OEM and ODM service to our respectable customers to meet their individual requirements.We introduced advanced milling, turning machines, heat treatment equipment and bearing testing machines to guarantee the quality of the bearings because we know “Quality is the life of Guomai” .Now our top products include taper roller bearing, angular contact ball bearing, deep groove bearing ,spherical bearing and cylindrical roller bearing with P5, P4 accuracy grade.

After so many years of developing, CZPT has built up an excellent sales network within China. Our 2 bearing brands “CVZ” and “Bentu” are well known and have high reputation within the industrial equipment and components field. Moreover, with confidence of our bearing quality, we started to export our bearings 4 years ago. Customers from Europe, North America, Middle East, Southeast Asia and Africa have enjoyed the happiness our bearings brought to them.

Guomai Bearing always upholds “WIN-WIN” spirit and believes in “Details determine success” philosophy, and keep improving bearing quality in the past 20 years.  Some series of our bearings have similar quality with SKF, NSK, Timken, NACHI, KOYO, CZPT and other world famous brands but with lower price.
Looking to the future, CZPT will insist on the technology innovation and processing levels to provide the most appropriate bearing products and service to our customers.

Bearing web page description and models may be limited, please contact us for more information.

Reasons to Choose Us ?

—–Why Choose Us???—–

Reasons to choose CZPT Bearings as your 6000/6200/6300 series deep groove ball bearing partner 

1. Bearing designing: Guomai has our own bearing R&D team and adopts Germany technology. This enables us to provide OEM and ODM service to you.
2. Production process: We strictly follow the 5S production process and acquired ISO9001:2008 quality management system certificate. Besides, we introduced from abroad world famous brands lathes and heat treatment equipment, this enables us to provide high precision bearings with similar quality to world famous brands such as SKF,TIMKEN,NSK,NTN,KOYO,NACHI and so on.
3. Materials: To ensure the high quality of bearings, we use high carbon chrome bearing steel which provides high rigidity, and high resistance to CZPT wear to produce the bearings. Low carbon cold rolled steel and low carbon stainless steel is also used according to customers’ requirements.
4. Quality inspection: All bearings will be strictly tested before packing. We have CZPT talysurf, hardness meter,clearance detector,vibration(speed) measuring instrument,roundness instrument to guarantee all bearings are qualified with the standards.
5. Lubricants: Suitable lubricants are used to protect the bearings from oxidation or corrosion of parts thus enable our bearings with longer lifetime, low noise and better high temperature performance. Selection of lubricants is generally governed by the bearing application. Right choice of high quality lubricants could prevent metal to metal contact and conduct heat away from the bearings.
6. Packing: Guomai bearings pay attention to every detail in the bearing production process. We adopt plastic bag, Kraft paper, thick paper box and cartons to protect the bearings from unexpectable damage during the transportation and warehouse stock.
7. Factory direct marketing: We are the factory and not the distributor or trading agent, so we could provide the same quality with competitive price.

Guomai Featured Bearings

Featured Bearings

International Trade Show

Exhibition

Packaging & Shipping

Guomai Bearings, Roll Together with the World and You!!!
F6000 F6001 F6002 F6003 F6004 F6005 F6006 F6007 F6008 F6009 F6571 Z ZZ RS 2RS F6000-2RS F6001-2RS F6002-2RS F6003-2RS F6004-2RS F6005-2RS F6006-2RS F60070-2RS F6008-2RS F6009-2RS F6571-2RS F6000ZZ F6001ZZ F6002ZZ F6003ZZ F6004ZZ F6005ZZ F6006ZZ F6007ZZ F6008ZZ F6009ZZ F6571ZZ

Overview of Different Types of Pulleys

A pulley is a wheel mounted on a shaft or shaft. Its purpose is to facilitate the movement or change of direction of the cable or taut rope, and to transmit power between the cable and the shaft. Pulleys are typically used for lifting, winding or forklift applications. If you are building your own pulley system, the following design and installation considerations should be followed. This article will give you an overview of the different types of pulleys.

Pulley System Mechanics

There are many different ways to utilize the mechanism of the pulley system. The most basic pulley system consists of a fixed wheel and a support frame. Both components are connected by ropes or cables used to support the load. A pulley system is effective when the force required to lift the load is less than the weight of the object being lifted.
One way to use a pulley system is to suspend a block with a mass of 0.80 kg on a fixed pulley. Then another person can hang a bucket weighing up to 40kg. The weight of the bucket is transferred to the fixed pulley. The rope is attached to the pulley by a loop or sling. The rope will spin and pull on the barrel or block.
The pulley system is also an important tool for lifting heavy objects. Pulleys are often used in construction equipment to make lifting heavy objects easier. Gun tackles, yard tackles, and stationary tackle systems are common examples of these devices. They use the mechanical advantage of the design to guide the force that lifts the object. If you want to learn more about pulley systems, visit Vedantu. This website will provide you with a full description of the mechanism and its application.

Types of pulleys

Many different types of pulleys are used to lift heavy objects. They change the direction of the force and are an integral part of the cable system. Therefore, pulleys can move large and heavy objects more easily. However, before buying a pulley, you should have an idea of ​​the benefits it brings. Below are some of the most common uses for pulleys.
Conical Pulley: Consists of several small conical pulleys connected to each other. The larger base of 1 pulley is used to guide the force. Round pulleys are used in the same way as step pulleys. They are widely used in industry and can be purchased at any hardware store. Pulleys are a huge investment, and the benefits they provide far outweigh the cost.
Movable Pulls: These are similar to their names, but work by allowing objects to move with the pull. Their movable parts are attached to the object to be lifted. They are also ideal for lifting heavy loads and can be found in utility elevators and construction cranes. They are also used in many other industries. They can also be made of wood, plastic or metal. The type of pulley you use depends on its intended use.

Mechanical Advantages of Pulley Systems

A pulley system is a simple machine that reduces the effort required to lift heavy loads. This mechanical advantage is proportional to the number of loops. For example, if you have a single rope loop, you must apply equal force to lift the weight. When you add another rope loop, you can lift heavier weights just by applying the same force. Therefore, a pulley system is an excellent way to use gravity to your advantage.
Mechanical advantage is a measure of the effectiveness of a pulley system. This ratio of force to work is called the mechanical advantage. In other words, if the rope system has a large mechanical advantage, it means that it requires less force to lift heavier loads. This advantage is usually measured in kilograms and is the same for all pulley systems. In general, the greater the mechanical advantage, the less effort is required to lift the load.
The mechanical advantage of a pulley system is that a single movable pulley requires half the force to lift an object than a single fixed pulley. Assuming frictionless bearings, the MA of a single pulley system is 2, similar to the MA of a single lever. A single pulley travels twice as much as it takes to move heavy objects manually.

Considerations when designing and installing a pulley system

The capacity of the pulley depends on the type and diameter of the cable. Besides its diameter, its sheath should also support it well. The basic function of the pulley is also important. However, most people tend to ignore the pulley selection process, resulting in ineffective load-pull capabilities. To avoid such problems, different parameters must be carefully considered during design and installation.
During the design and installation of the pulley system, the ratio of the cable diameter to the largest pulley diameter must be considered. Those who work in the industrial sector will have an idea of ​​this ratio. The greater the D:d ratio, the greater the capacity of the cable to withstand the load. The best way to ensure secure design is to take the right information and use it to design a system that is both robust and secure.
When designing a pulley system, it is important to remember that the pulley needs to have enough power to operate safely. In addition to horsepower, the belt should have sufficient elongation to absorb shock loads. If the elongation of the belt is very small, it is very likely that the teeth will be sheared or broken, causing serious damage to the system. Extensive belt sag should be compensated for by offsetting the driven pulley. Finally, the frame supporting the pulley should be rigid. Otherwise, the non-rigid frame will cause center distance and tooth skipping changes.

Add more pulleys to the system

Adding more pulleys to the spool might have some effect. The friction between the rope and the pulley increases with the number of pulleys, which in practice limits the number of spools. The best solution is to combine the pulleys into 1 housing. If the load is small enough, adding a few pulleys probably won’t make a difference.
Using multiple pulleys allows a single load to be lifted with half the force required. The longer the rope, the greater the mechanical advantage. In fact, a spool can withstand a load of 100 N. Additionally, adding more pulleys quadrupled the mechanical advantage. In this case, a single 100 N load would require a force of 25 Newtons.
When the rope is used, it stretches as the weight of the object increases. This will make the rope longer, increasing its length and increasing the distance over which the load can be lifted. Eventually, the rope will break and the lifted object will fall. Then you will have to buy a new rope. It may seem like an expensive proposition, but it pays off in the long run.

cast iron pulley

Cast iron pulleys are the most popular choice among industrial users. They are made of solid cast iron and usually cost very little. Their rims are held in place by a mesh that extends from a central boss. They also have spokes and arms that hold them in place. These pulleys are ideal for a variety of applications including fan belts, compressors and conveyors.
V-groove drive pulleys are ideal for general purpose pulleys. It has an inner diameter of 1 inch and is commonly used in feeders and ventilation curtain systems. Its steel straps prevent rust and ensure it meets or exceeds industry standards. 3-1/2″ cast iron pulleys are also available. In addition to the V-groove drive pulley, there are similar pulleys for power transmission. The V-groove drive pulley is powder coated for added durability.
The cross section of the arm is elliptical, with the long axis twice as long as the short axis. The radius of the arm is equal to the diameter of the pulley. The thickness of the arm is a key factor to consider when purchasing a pulley. If you’re not sure which material you need, you can always consider wooden or steel pulleys. They are lighter and have a higher coefficient of friction than metal pulleys.

timing pulley

Plastic timing pulleys have many advantages over steel timing pulleys. On the 1 hand, they are lightweight and corrosion resistant, making them ideal for applications that do not require high torque and tensile strength. Another benefit is their resistance to high temperatures. Plastic timing pulleys are ideal for applications involving flammable gases, solvents or particles. They can last for many years. For more information on the different types of plastic timing pulleys.
Vertical shaft drives require flanged timing pulleys. For large span drives, at least 1 of these pulleys must be flanged. The flange provides a secure connection to the shaft and prevents ratcheting of the timing belt. Finally, HTD timing belt teeth prevent timing belt ratcheting. These teeth need a large enough space to be seated. However, they can also cause a backlash. These pulleys are not suitable for applications where positional accuracy is critical.
Timing belt systems are designed to avoid such problems. The drive shaft and the driven shaft are aligned with each other. The pulleys are located on different planes and are connected by pitch lines. The pitch line of the timing pulley coincides with the pitch line of the belt. These pulleys are also easier to implement and maintain. It is better to use a synchronous system because the resulting gear system emits less noise than other systems.